EAEU Coatings Regulation: What the Proposed Transition Would Mean for Buyers
See the EAEU coatings start dates, the two proposed transition routes and which product and batch documents buyers should check.
The Eurasian Economic Commission is taking comments through 12 December 2026 on draft transition rules for paints and coatings under TR EAEU 053/2026. The draft addresses what happens to existing conformity documents and which products could still be made and placed on the market under transitional arrangements. To see which provisions could affect an order, start with the exact coating and destination, then check whether mandatory conformity assessment applied there before the regulation's start date.
Start with the destination and the product
Council Decision No. 65 sets 1 January 2028 as the start date in Armenia, Belarus, Kazakhstan and Russia. It sets 1 January 2032 for Kyrgyzstan. The separate transition draft would allow products complying with the regulation to be placed on the market in Kyrgyzstan from 1 January 2028. That proposal does not move Kyrgyzstan's binding start date.
Check the product as offered. The adopted regulation covers specified finished materials, including liquid, powder, aerosol and multicomponent coatings. It expressly excludes specified inputs such as resins, solvents and thinners, hardeners, driers and accelerators. A purchase list may contain both a finished coating kit and a separately sold input. Check how each is marketed and what the scope clauses say before carrying an assessment from one line item to the other.
What the two proposed routes would require
The 60 months in the draft would be counted from the applicable start date. It proposes an outside limit for certain arrangements, with separate conditions for each route.
| Status under the earlier requirements | What the draft proposes |
|---|---|
| Subject to mandatory assessment | Existing documents would remain valid until their own expiry, up to 60 months after the applicable start. Production and placing on the market under the old requirements would rely on documents issued or accepted before that date. The applicable national marking rules would apply, with no EAEU market circulation mark on goods using this route. |
| Outside mandatory assessment | The draft would allow production and placing on the market for up to 60 months without mandatory conformity assessment documents or the national conformity or market circulation mark. |
Under the draft, new conformity documents under the earlier requirements could no longer be issued or accepted from the applicable start date. Stock placed on the market under either of the draft routes could continue to circulate for the shelf life set by the manufacturer. An expiring conformity document and a lot's shelf life therefore belong in separate records. Stock already placed on the market and new production require different checks.
What to record before renewing a coating order
Create one line for each product and destination. Record the exact grade or kit and the form in which it is being sold. Verify the earlier mandatory-assessment status for that destination. Where documentation applies, record the product scope, number, issue or acceptance date and expiry. For existing inventory, capture the lot identity, evidence of when it was placed on the market and the manufacturer's shelf life.
For example, if a document would expire 18 months after the applicable start, its own expiry would come first under the proposal. A new shipment after that point would need a separately verified basis. A seller's claim that the coating has a five-year shelf life does not extend the document's validity. Similarly, an assertion that a product previously needed no assessment should be supported by the requirements and scope for that specific destination and SKU.
Check the adopted text when the Commission publishes its final transition decision, especially before promising a dispatch date or agreeing which documents will accompany a shipment. See more coatings industry updates.
